| Input Specifications |
| Input Voltage |
120, or 208, or 240,or 277 VAC, +20% to -35% |
| Input Frequency |
60 Hz ±0.5 Hz |
| Power Factor |
1.0 unity |
| Overcurrent Protection |
Circuit Breaker |
| Power Connection |
Hard wired (terminal block) |
| Input Configuration |
2 wire (hot, neutral) plus ground |
| Output Specifications |
| Output Power Rating |
3-17 kW
available (Normal Mode / Emergency Mode) |
| Output Voltages |
120, 208, 240, and 277 VAC, single phase |
| Voltages Regulation |
±3% No Load to Full Load;
±3% High Line to Low Line |
| Frequency |
60Hz ±0.25 Hz (when in inverter) |
| Wave Shape |
Sine Wave |
| Harmonic Distortion |
<7% THD; <5% Single Harmonic |
| Crest Factor |
3:1 Typical |
| Power Factor |
1.0 unity |
| Overload |
125% for Ten (10) minutes; 150% Surge |
| Protection |
Fault Current Limited by Ferroresonant Design |
| Noise Rejection |
-120 dB Common-Mode;
-60 dB Transverse-Mode |
| Battery Specifications |
| Battery Run Time |
90 min |
| Battery Type |
Sealed maintenance-free (AGM) battery |
| Nominal DC Link |
48 or 120 VDC link |
| Overcurrent Protection |
Circuit Breaker |
| Physical Specifications |
| Accessibility |
All servicing is through the front |
| Cable Entry |
Bottom |
| Mounting |
Four (4) mounting holes provided to anchor enclosure to
pedestal |
Cabinet Sizes with
Standard Run Times
(W x H
x D) |
40"(W) x 74.5"(H) x 20"(D)
2.1 to 5.2 kW: 1 Cabinet
7 to 17 kW: 2 Cabinets |
| Other Cabinet Sizes dependent on Battery Run Time |
| Environmental Specifications |
| Humidity |
0 - 95% RH w/ no condensation |
| Operating Temperature (electronics only) |
Tested for -34°C - 58°C (-29°F to 136°F). |
| Storage Temperature |
-20° to 60°C. (-4° - 140°F) |
| Altitude |
Up to 10,000 ft |
| Safety Agencies |
CUL, CSA Listed to UL1778, MEA Approved; State
Fire Marshal Approved (CA, NY, IL) |
Suitable
for Harsh Environment, Outdoor Applications
